Paper Detailed Settings Dialog Box - Canon imagePROGRAF iPF770 User Manual

Paper Detailed Settings Dialog Box

•
To display the Paper Information on Printer dialog box, on the Main sheet, click Get Information by Media Type.
(See "Main Sheet .")
Note
• A
Paper Source
Shows the paper source supported by the printer, as well as information about the loaded paper. To update the
paper source and media type settings in the printer driver, select the desired Paper Source option and click
OK.

Paper Detailed Settings Dialog Box

Paper Detailed Settings Dialog Box
In the Paper Detailed Settings dialog box, you can set Drying Time for the paper selected with Media Type of the
Main sheet, etc.
You can display this dialog box by clicking Advanced Settings of Media Type on the Main sheet. (See "Main
Sheet .")
P.148
➔
As for the items for which you can select Printer Default in this dialog box, you also can set them from the control
panel of the printer. (See "Menu Settings.")
A
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Between Pages setting is only valid for rolls.
• B
Between Pages
You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is re-
quired for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if
Cutting Mode is set to Automatic.
Setting Item
Printer Default
Off
30 sec. / 1 min. / 3 min. / 5 min. /
10 min. / 30 min. / 60 min.
• C
Between Scans
You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding
or color unevenness such as when bleeding occurs on a page or when color unevenness occurs during bor-
derless printing.
Setting Item
152
Printer Default
Off
1 sec. / 3 sec. / 5 sec. / 7 sec. / 9
sec.
P.148
➔
P.416
➔
The setting of the control panel of the printer is applied.
Paper is ejected immediately after printing completes.
Paper is ejected when the set time elapses after printing completes.
The setting of the control panel of the printer is applied.
The next line is printed immediately after a line is printed.
The next line is printed when the set time elapses after a line is printed.
* Increase the time according to the occurrence condition of bleeding or unevenness.
Details
Details
iPF770
User's Guide