Canon imagePROGRAF iPF770 User Manual page 399

iPF770
g Arrow buttons
◀ button
•
Press this button on the Tab Selection screen to move to another tab.
In menu items requiring numerical input, press this button to move to another digit.
• ▲ button
Press this button in the menu to move to another item.
In menu items requiring numerical input, press this button to increment the number.
▶ button
•
Press this button on the Tab Selection screen to move to another tab.
In menu items requiring numerical input, press this button to move to another digit.
• ▼ button
Press this button in the menu to move to another item.
In menu items requiring numerical input, press this button to decrement the number.
h OK button
Press this button on the Tab Selection screen to display the menu of the tab shown.
Pressing this button in menu items of each tab for which
the menu item, enabling you to execute menu commands or set menu values.
Also press this button if the Display Screen indicates to press the OK button.
i Back button
Displays the screen before the current screen.
j Menu button
Displays the Tab Selection screen. (See "Menu Settings.")
k Load button
Press this button when loading or replacing paper.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
l Feed button
Pressing this button when rolls are loaded enables you to reposition the paper. (See "Feeding Roll Paper Man-
ually.")
P.330
➔
m Cut button
Pressing this button when rolls are loaded cuts the paper, if you have specified Automatic or Eject in Cutting
Mode in the Control Panel menu. (See "Specifying the Cutting Method for Rolls.")
n Cut Sheet lamp (green)
Lit when sheets are selected as the paper source.
o Roll Media lamp (green)
Lit when rolls are selected as the paper source.
•
To recover from Sleep mode, any button can be pressed except the Power button.
Note
User's Guide
is displayed at left will move to the lower level of
➔
P.322
➔
P.340
➔
P.416
P.333
➔
Control Panel
399