Borderless Printing At Actual Size - Canon imagePROGRAF iPF770 User Manual

Hide thumbs Also See for imagePROGRAF iPF770:
Table of Contents

Advertisement

Borderless Printing at Actual Size

Borderless Printing at Actual Size
Borderless Printing at Actual Size
Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images)
without a surrounding margin, or border.
In regular printing, a margin required by the printer is added around the original. With borderless printing, you can
print documents without the margin, so that the printed image covers the entire surface of the paper.
Borderless printing is only available with rolls.
Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths.
(See "Displaying the Paper Reference Guide.")
Although it normally prints borderless on the top, bottom, left, and right (4-edge borderless), in the following
cases, it becomes borderless only on the left and right (2-edge borderless) because the top and bottom of the
printed image are not automatically cut.
When paper where the borderless printing is described as two edges only in the Paper Reference Guide
(paper where printed image areas cannot be cut cleanly) is selected
When the following settings are made in the printer control panel
Cutting Mode is Manual
CutDustReduct. is On
When auto cut is configured as not performed in the printer driver
Borderless printing is not possible if details such as crop marks and margins are included as data on the periph-
ery of the original.
Important
If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting
in order to prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed
borderless.
These features cannot be used in combination with borderless printing: special page layouts, centering originals,
and printing cut lines on rolls.
If Fit Paper Size or Print Image with Actual Size (Windows only) is selected while performing borderless print-
ing, Rotate Page 90 degrees (Conserve Paper) cannot be selected. Note that if borderless printing is possible,
then even if the original is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.
Choose the method of borderless printing that suits the original, as desired.
Print Image with Actual Size
Prints originals at actual size, without enlarging or reducing them. We recommend when focusing on image
quality. You should create the original at a size larger by 3 mm on each side than the paper size.
72
Not all page sizes are available.
Note
When performing borderless printing without using Print Image with Actual Size, the image deteriorates
slightly because the image is automatically enlarged.
For instructions on borderless printing of photos and images at actual size, refer to the following topics, as ap-
propriate for your computer and operating system.
Borderless Printing at Actual Size (Windows)
P.313
P.73
iPF770
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipf670

Table of Contents