Canon imagePROGRAF iPF770 User Manual page 511

Hide thumbs Also See for imagePROGRAF iPF770:
Table of Contents

Advertisement

iPF770
2
At this point, open the Maintenance Cartridge Cover.
3
Hold the used Maintenance Cartridge by the grip (a) with
one hand and put your other hand under the Maintenance
Cartridge to hold it firmly on the bottom, keeping it level as
you pull it out.
Used Maintenance Cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge level
during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may
Important
leak and cause stains.
The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Mainte-
nance Cartridge in another printer.
4
Keep the used Maintenance Cartridge level as you put it in
the plastic bag. Expel excess air from the plastic bag and
seal the zipper.
5
Confirm the Maintenance Cartridge is right-side up, put it in
the box with the packaging material attached, and store it
so that it stays level.
Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Also,
seal the zipper thoroughly. Otherwise, ink may leak and cause stains.
Important
Put the used Maintenance Cartridge in the plastic bag of the new cartridge, and dispose of it in accord-
ance with local regulations.
Note
User's Guide
Replacing the Maintenance Cartridge
a
511

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipf670

Table of Contents