Messages Regarding Hp-Gl/2; This Type Of Paper Is Not Compatible With Hp-Gl/2; Gl2: Wxxxx The Memory Is Full. (Xxxx Is 0501, 0903, Or 0904); Gl2: W0502 The Parameter Is Out Of Range - Canon imagePROGRAF iPF770 User Manual

This type of paper is not compatible with HP-GL/2.

Messages regarding HP-GL/2

Messages regarding HP-GL/2
This type of paper is not compatible with HP-GL/2. ........................................................................................ 570

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) ....................................................................... 570

GL2: W0502 The parameter is out of range. ................................................................................................... 570

GL2: W0504 This command is not supported. ............................................................................................... 570

This type of paper is not compatible with HP-GL/2.
This type of paper is not compatible with HP-GL/2.
The printer has received a HP-GL/2 print job
that cannot be printed on the paper that has
been advanced.

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)

GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904)
Cause
The printer memory is
full.

GL2: W0502 The parameter is out of range.

GL2: W0502 The parameter is out of range.
A parameter specified in a HP-GL/2 command is out of the suppor-
ted range.

GL2: W0504 This command is not supported.

GL2: W0504 This command is not supported.
The printer has received an unsupported HP-GL/2 com-
mand.
570
Cause
Follow these steps to replace the type of paper in the printer.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. How-
ever, note that this error may cause paper jams and affect the printing quality.
Because the entire print job could not be received, the printer may not be able to print the entire original.
Check the printing results.
In the Control Panel menu, setting On-the-Fly to On may enable printing. However, check the printing
results because the image may be incomplete in some cases.
Cause
Cause
Press ▲ or ▼ to select Change Paper, and then press the OK button.
Replace the paper with a type compatible with HP-GL/2. For details on paper
compatible with HP-GL/2, refer to the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Corrective Action
Check the print job.
If you have specified ProcessingOption > Warning > On in
the Control Panel menu, set it to Off instead.
Check the print job.
If you have specified ProcessingOption > Warning > On in the
Control Panel menu, set it to Off instead.
Corrective Action
P.313
➔
Corrective Action
Corrective Action
iPF770
User's Guide