Canon imagePROGRAF iPF770 User Manual page 508

Replacing the Printhead
9
Pull the Printhead Fixer Cover down toward the front to
lock the Printhead in place.
10
Push the Printhead Fixer Lever toward the back of the
printer until it clicks.
11
Close the Top Cover.
Ink now fills the system. It takes about seven minutes to
complete.
Important
Note
508
•
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak
out.
•
After Printhead has been replaced and filled with ink, Head Posi. Adj. ( Auto(Advanced) ) is performed if
you have selected Rep.P.head Print > On in the Control Panel menu. (See "Menu Settings.")
In this case, follow the instructions on the Display Screen for Printhead adjustment.
If Rep.P.head Print is Off, perform Head Posi. Adj. ( Auto(Advanced) ) yourself. (See "Automatic Ad-
justment to Straighten Lines and Colors.")
P.480
➔
iPF770
P.416
➔
User's Guide