Borderless Printng Not Possible; Paper Position Not Suitable For Borderless Printing; Roll Paper Is Not Securely In Contact With Roll Holder - Canon imagePROGRAF iPF770 User Manual

iPF770

Borderless printng not possible.

Borderless printng not possible.

Cause
The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.
The loaded paper is a size not
compatible with borderless print-
ing.
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the supported
width for borderless printing.

Paper position not suitable for borderless printing.

Paper position not suitable for borderless printing.

Cause
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.
The paper is loaded askew.

Roll paper is not securely in contact with roll holder.

Roll paper is not securely in contact with roll holder.

When the roll was loaded, the roll was not inserted firmly all
the way on the Roll Holder.
User's Guide
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper
Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Use each type of paper only where the recommended environmental conditions are met. For
details on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are be-
tween the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cause
Corrective Action
P.313
➔
P.327
➔
P.329
➔
P.320
➔
P.322
➔
P.313
➔
P.313
➔
Corrective Action
P.313
➔
P.320
➔
Corrective Action
Follow these steps to reload the roll.
1.
Press the OK button and remove the roll holder from the printer.
2.
Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Attaching the Roll Holder to Rolls.")
3.
Load the Roll Holder in the printer.
Borderless printng not possible.
P.320
➔
563