Canon imagePROGRAF iPF770 User Manual page 424

Menu Settings
System Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use USB
Use Ethernet
Use RemoteUI
Reset PaprSetngs
Show Job Log
424
Prep.MovePrinter
Setting Item Description, Instructions
Choose Off to give priority to margin settings. The larger
value is used if the margin specified in the printer driver
does not match the margin in the printer menu.
Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position.
Specify On to have rolls cut when printing begins after
Sleep mode or when the power is restored. Selecting Au-
tomatic will trim the edge when the roll has been in the
retracted position for two days or more.
Choose On to have the printer automatically execute the
Advanced Adj. operations after you replace the Print-
head. (See "Automatic Adjustment to Straighten Lines and
Colors.")
P.480
➔
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer ad-
just the timing for checks based on the frequency of noz-
zle use. Choose 1 page to check once per page. Choose
10 pages to check once per 10 pages. Choose Off to not
execute check.
If On is selected in Warning, a warning may be displayed
on the Control Panel depending on the result of the nozzle
check.
When Off is selected, the device can no longer be ac-
cessed via USB.
When Off is selected, the device can no longer be ac-
cessed via Ethernet.
Choosing Off prohibits access from RemoteUI. Settings
can only be configured from the control panel.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Selecting Off prevents display of the log in Job Menu >
Job Log. Additionally, the log is not printed if you choose
Job Menu > Print Job Log. Note that because job logs
are not collected, the Status Monitor accounting functions
will not work correctly.
Select this option when transferring the printer to another
location.
Follow the instructions displayed to complete the required
procedure.
(See "Preparing to Transfer the Printer.")
Not displayed during a warning message that the remain-
ing Maintenance Cartridge capacity is low.
iPF770
P.518
➔
User's Guide