Canon imagePROGRAF iPF770 User Manual page 294

Color Adjustment
2
Select Color Adjustment.
3
Drag each slider to the left or right to adjust.
Cyan
Magenta
Yellow
Brightness
Contrast
Saturation
Gray Tone
Note
Adjusting Monochrome
Use the monochrome setting to print monochrome images of color photographs captured with a scanner or digital
camera or other color images.
1
294
Select Monochrome on Color Mode in the Color Settings panel.
Setting
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the strength of colors to compensate the hues.
Adjusts the brightness of the entire image. When the results of the printout are brighter
than the original images such as the original photo before scanning and graphics cre-
ated on the display, or when you want to print in different degrees of brightness, use this
feature.
Adjusts the relative brightness between the brightest and darkest portions of the image.
*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.
Adjusts the hues for vivid color or dark color.
Adjusts gray from cool black (bluish tones) to warm black (reddish tones).
•
You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Details
iPF770
User's Guide