LEGRAND Archimod Operating And Maintenance Manual page 66

8. Diagnostics
CM MALFUNCTIONING
BATTERY CHARGER FAILED
MODULE FAILED
UPS IN EMERGENCY!
Shutdown in progress...
PM not updated!
66
®
MESSAGE
BIG OVERLOAD The load in output has caused an excessive drop in the output voltage.
BACKFEED Backfeed error detected.
Communication error between commands.
The battery charger circuit of one or more Power Modules has failed.
It must be either repaired or changed.
One or more Power Modules have failed. They must be either repaired or changed.
An excessive load (e.g. short circuit) has caused an excessive drop
LOAD OFF! in the output voltage for too long a time or the load has been switched off
due to a prolonged battery overload.
UPS in Emergency.
UPS STOPPED! UPS has stopped.
The unit is shutting down because it was programmed by the user.
Command in hot-swap.
Modules off
The power modules are not being fed and are ready to be taken out.
The software of one or more Power Modules is not compatible with the command.
Update the modules before starting the unit.
MEANING