Meeting Conference; Meeting Initial Configuration; Meeting Server Name Setup - Toshiba IPedge Installation Manual

MEETING CONFERENCE

MEETING CONFERENCE
MEETING INITIAL
CONFIGURATION
Meeting Server Name
Setup
Installation Manual June, 2011
5. Click on the Save icon.
6. Connect the IPMI to the LAN or WAN.
Important! The IPMI connection must be able to route to the IPedge
LAN connection.
WARNING! This connection allows access to the Linux operating
system of the IPedge server. Toshiba recommends that
you change this user name and password. Record and
safely store this information. If lost this password can
not be recovered.
Every IPedge server with Meeting (Meet Me Conference) licensed must
perform the following procedures.
The Meeting server software is pre-installed on the IPedge server when
shipped. The Meeting server IP address must be set and the server
started as part of the IPedge system installation.
1. Login in to Enterprise Manager, select Applications > Webmin >
Network Configuration > Host Addresses.
2. Select Add new host address enter the IP address of the IPedge
server then add:
admin.SERVER_NAME (enter the name of your IPedge server).prv
webconf.SERVER_NAME (enter the name of your IPedge server).prv
Note: The admin and webconf host addresses must be entered in the
order shown. Any other host names or DNS entries must be
entered below these two.

Meeting Server Name Setup

4-15