Remote Update Procedure - Toshiba IPedge Installation Manual

REMOTE UPDATE PROCEDURE

REMOTE UPDATE
PROCEDURE
Installation Manual June, 2011
2. In the Select Target Server screen click to check-mark the server you
will up date then click on the Next button.
• Select the update mode.
Local Update - The update file is on a USB drive connected
to the IPedge server.
3. When Local Update is selected select USB in the Update Device
menu.
4. A list of the update files on the USB drive will be displayed.
If the update files are already extracted click on the Skip button to
skip the extract process and start the file update process.
— OR —
Select the files to be used then, click on the Extract button. The
extract button will extract the compressed file and copy it to the target
IPedge server.
Note: The file will only extract if it is newer than file already on the
server.
5. When the file extraction is complete the Run update button will
appear. Click to run the update. If the update file is not a newer file
than what is already on the IPedge server the Run update button will
not appear.
6. Select the IPedge server that has the extracted update files available.
7. Click on the Download File button.
8. When the file download is complete the Run update button will
appear.
9. Click on the Run update button to start the update process. This
process will take about three to five minutes.
Note: If the target server already has the updates Enterprise Manager
will advise that no update is necessary and the Run update
button will not appear.
10. Some updates will cause a system restart. If this occurs Enterprise
Manager will logout. If the server does not restart the update
complete screen will be displayed.
Important! Remove the USB device from the server before the
reboot.
11. Login to Enterprise Manager.
12. Synchronize the database.
A Remote Program Update can preformed from anywher. Remote means
that the update files are loaded on the PC used to access Enterprise
Manager. Program Update can update the IPedge core software, the
Linux operating system and the Media Library. The program update file
can be accessed from a USB drive connected to the IPedge server.
1. In Enterprise Manager select Maintenance > System Maintenance
> Program Update.
Update File Source
15-17