Program Messaging - Toshiba IPedge Installation Manual

PROGRAM MESSAGING

PROGRAM MESSAGING
Installation Manual June, 2011
1. Using Enterprise Manager, click Application > Messaging.
2. Select the appropriate system where Messaging resides.
3. Click OK.
4. From the main menu, click Registry > Parameters.
5. Check Default IPedge.
6. Assign Default PBX as 127.0.0.1
7. Assign TcpSMDIPort as 1000.
Note: The port registry must match the System > I/O device client port
number in Enterprise Manager.
8. Click the Save icon.
9. Click Registry > VOIP
10. Scroll down to the Registry assignment, click on the Fill Registry
range button.
11. In the Auto fill register Range dialog box enter the register range,
based on the number of licenses and enter the first DN of the SIP
station DNs assigned for messaging.
12. Click on the Insert button.
13. Assign SIP PBX Address with <IPedge system IP address>.
Assign SIP PBX Port as 5060 (default setting).
14. Assign VM SIP Port as 5070 (default setting). Click Save.
15. Restart Messaging.
See "To Restart Messaging" on page Chapter 14 –6.
14-5