Set Default Gateway - Toshiba IPedge Installation Manual

NETWORK CONFIGURATION

Set Default Gateway

Installation Manual June, 2011
6. Click to set MTU to Default.
7. Click on Save and Apply.
8. Close the Webmin window.
9. Login to Enterprise Manager using the static IP address you just
assigned.
10. Select Application > Webmin.
11. Select Networking > Network Configuration. Click on the Routing
and Gateways icon.
12. Select the Boot time configuration tab.
13. For bond0 enter the IPedge server gateway server address.
14. For Use as router select No.
15. Click on the Save button.
16. Select Hostname and DNS Client.
123.456.789.12
123.456.789.123
17. Enter the IPedge server Hostname. The Hostname should be
descriptive of the server such as the name of the city or location on a
campus.
Note: The Hostname should be the same as the server name.
18. There is no need to change the Resolution order.
19. Enter the DNS server address(es).
20. If the enterprise has a domain setup enter it in the Search domains
box. If not leave the default entry.
21. Click on Save.
22. Click on Return to network configuration.
23. On the Network Interfaces page click on Apply Configuration.
24. Close the Webmin window.
25. Close the Enterprise Manager browser window.
26. Login the Enterprise Manager using the new IP address of IPedge
server.
Set Default Gateway
na.mycompany-dpg.local
4-5