Ipmi / Bmc Ip Address - Toshiba IPedge Installation Manual

IPMI / BMC IP ADDRESS

IPMI / BMC IP ADDRESS
15-2
• Remote access to text-based, graphic-based system
information, including BIOS configurations and OS operation
information (KVM)
• Remote management of utility/software applications
IPMI provides Network Management Security via remote access/console
redirection.
Key features include:
• User authentication enhancement
• Encryption support enhancement, allowing for password
configuration security to protect sensitive data transferring via
Serial over LAN.
• The IPMI supports the following Management tools: IPMIView, CLI
(Command Line Interface)
• RMCP+ protocol supported
The IP address of the IPMI port should have be set during the New
System Installation process. Skip to
during installation.
If the address was not setup use the following steps to connect a PC to
the IPMI using the default address settings:
IP Address: 192.168.254.251, Subnet Mask: 255.255.255.0,
Default Gateway: 192.168.254.1
1. Login to Enterprise Manager. Select Maintenance > System
Maintenance > Hardware Monitoring.
2. Select the BMC Network Adapter tab.
3. Assign the IP Address, If static; assign Subnet Mask and Default
Gateway.
4. Click on the Save icon.
5. Connect the BMC to the LAN or WAN.
6. Connect IPedge Server (BMC LAN adapter, not eth0 or eth1) and the
PC to the WAN/LAN.
7. Launch a java-enabled browser (e.g. Internet Explorer) on the PC
and access http://BMC LAN IP address (e.g. http://192.168.254.251)
8. Enter the following user name and password
User Name: ADMIN
Password: ADMIN
Important! This process will login in to the server remote terminal.
Change the User Name and Password for better system
security. Record the User Name and Password. There is
no password recovery process. Use this terminal only
under the direction of a Toshiba engineer.
Step 7 if the IPMI address was setup
Installation Manual June, 2011