Chapter 10 - Network Address Translation; Media Relay Server Setup; Ipedge Configuration - Toshiba IPedge Installation Manual

Chapter 10 – Network Address
Translation
IPedge Server
Media Relay Server
IP Address
IPT
MEDIA RELAY SERVER
SETUP

IPedge Configuration

Installation Manual June, 2011
Private
LAN
21000 ~ 22999
IPT
Enter the Public IP address of the IPedge server. Enter the port range to
be used for calls. Each call requires two UDP ports for the audio streams
(one port out bound, one port inbound).
1. Select System > Media Relay Server
Click on the New icon
Router Integration = Enable
Media Relay Server Service IDs = 1
Router IP Address = the Public IP Address of the Firewall
- Click on OK
2. Select the Port Forwarding Configuration
Router Public Port Range Low = Lowest port number
Router Public Port Range High = Highest port number
Media Relay Server Service ID = 1
Media Relay Server Private Port Range Low = Lowest port number
Media Relay Server Private Port Range High = Highest port number
Note: Typically; the Router Public Port Range values and the Media
Relay Server Private Port Range values are the same.
3. Click on OK
Inside Outside
Public
IP Address
Ports Ports
21000 ~ 22999
Public
Network
Router
IPT
10-1