Program Rollback - Toshiba IPedge Installation Manual

PROGRAM ROLLBACK

2. In the Select Target Server screen click to check-mark the server you
will up date then click on the Next button.
• Select the update mode.
Local Update - The update file is on a USB drive connected
to the IPedge server.
Remote Update - The update files have been extracted onto
an IPedge server in the network.
3. Select the IPedge server that has the extracted update files available.
4. Click on the Download File button.
5. When the file download is complete the Run update button will
appear.
6. Click on the Run update button to start the update process.
Note: If the target server already has updates Enterprise Manager will
advise that no update is necessary and the Run update button
will not appear.
7. Some updates will cause a system restart. If this occurs Enterprise
Manager will logout. If the server does not restart the update
complete screen will be displayed.
Program Rollback allows the System Administrator to roll back the system
software component to the previous backed-up state
1. Select Maintenance > System Maintenance > Program Rollback.
2. Select the server to roll back then, click on Next.
3. Click on the Rollback Program File button.
4. The rollback process progress will be displayed.
5. If the rollback included services that automatically restart the IPedge
server Enterprise Manager will logout and the final rollback details
screen will not display.