Meeting Ip Address Change Procedure - Toshiba IPedge Installation Manual

MEETING INITIAL CONFIGURATION
MEETING IP Address
Change Procedure
4-16
1. In to Enterprise Manager, select Applications > Meeting > IPedge.
2. In the Welcome Screen, select System Configuration the screen
below will display. Enter the following:
System Name - The Meeting service name
Server Name - The meeting admin server name. This is the name
registered in the DNS server.
Dial in Number - The pilot number of the voice conference station
group
Web Conference Server - The web conference server name. This is
the name registered in the DNS server.
3. Ensure that the Stack IP Address and Gateway Address are set to
the IPedge server IP Address. Click Submit.
admin.SERVER_NAME.prv
6000 (Pilot DN - Example only)
webconf.SERVER_NAME.prv
Select local time zone
4. Under System Configuration, select the Circuit Groups Tab.
IPedge Server Addr
5. Click on the Circuit Group to open the Edit Circuit Group Page.

MEETING IP Address Change Procedure

IPedge Server Addr
IPedge Gateway Addr
Installation Manual June, 2011