Toshiba IPedge Installation Manual page 149

NET SERVER MENU
Field
Application Name
User or Group
Read Level
Modify Level
Setting # 1
Setting #2
COS
Server Admin Privilege
Use Server-based
Configuration
Installation Manual June, 2011
Name of the application
Usually, the client name of the user is shown (see Clients). When it is set to
<Default> (or leaving it blank) the settings for the Default User can be
defined. It can be used to define the settings of typical users while any
additional clients that need settings other than those of the Default User
can be defined separately. Each user can be assigned to a group by setting
this number (application may use this to standardize settings/features for
each group).
This defines the access privileges for being able to read information about
the application. The settings are Denied, Self, Group, or World.
This defines the access privileges for being able to modify the information
about the application. The settings are Denied, Self, Group, or World.
Reserved for future use.
Reserved for future use.
Define a COS number. These options are used to control the user access
privileges. COS ranges from 0 to 63 is the sum of values assigned to each
privilege shown below.
Enables the user to do administration of server configuration files.
(value: 1)
When enabled, user will get the program configuration settings from the
server specified by application files. If this is disabled, the user will get
configuration settings from the local PC. (value: 2)
Description
Setup
13-9