Chapter 2 - Ipedge Hardware; Power Requirements; Ipedge Servers; Ec Server - Toshiba IPedge Installation Manual

Chapter 2 – IPedge Hardware

POWER REQUIREMENTS

IPedge SERVERS

Figure 2-1 IPedge Server Hardware - Front View

EC SERVER

Dimensions

Environmental
Specifications
Installation Manual June, 2011
Toshiba recommends an uninterruptible power supply (UPS) for the
IPedge server. A UPS is the preferred power source since it provides
automatic switch-over to 120 VAC back-up in case of a loss of power. The
specific input voltage and current requirements for each server is listed
the specifications for each model.
The IPedge hardware platform is available in two configurations. The
IPedge EC serving up to 200 users and the IPedge EM serving up to
1000 users. The servers are both 1U rackmount chassis. Refer to
2-1.
EC Server - Up to 200 users
EM Server - Up to 1000 users
For IPedge systems of up to 200 users. This server has one, front access
2.5 inch hard disk drive. Refer to
The IPedge EC server supports IPMI (Intelligent Platform Management
Interface) 2.0.
• Height 1.7" (43 mm) 1U
• Width 17.2" (437 mm) Fits a standard 19 inch rackmount
• Depth 15" (381 mm)
• Gross Weight 15.4 lbs (7 kg)
• Operating Temperature: 10° to 35°C (32° to 95°F)
• Storage Temperature: -20° to 60°C (-4° to 140°F)
Figure 2-2.
Figure
2-1