Quantum ValueLoader User Manual page 74

Diagnostics and Troubleshooting
ValueLoader Error Codes
Error Code Description
Cartridge Pick Error.
3 0 A3
3 0 A4 Import/Export Slot Position
Error.
Fan Error.
3 0 A5
ROM Error.
3 0 B0
RAM Error.
3 0 B1
NVRAM Error.
3 0 B2
Controller Timer Failure.
3 0 B3
Loader to Drive
3 0 B4
Communication IC Error.
Display Error.
3 0 B5
Memory Error.
3 0 B6
60 ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Details
An error occurred while trying to pull a
cartridge from the drive or a carousel slot.
The Import/Export slot door was not in the
requested position during device operation.
Can be caused by manually opening the door
or a cartridge or other obstruction is blocking
the door. Try removing the cartridge or
obstruction, then power cycle or reset the
ValueLoader.
The ValueLoader processor has detected a fan
error.
Power cycle the ValueLoader and attempt the
operation again. If the error recurs, contact
Quantum Technical Support.
Power cycle the ValueLoader and attempt the
operation again. If the error recurs, contact
Quantum Technical Support.
Power cycle the ValueLoader and attempt the
operation again. If the error recurs, contact
Quantum Technical Support.
An unrecoverable failure has occurred in the
controller timer circuit.
A failure in IC handling loader to drive
communication has occurred.
Power cycle the ValueLoader and attempt the
operation again. If the error recurs, contact
Quantum Technical Support.
Power cycle the ValueLoader and attempt the
operation again. If the error recurs, contact
Quantum Technical Support.