Quantum ValueLoader User Manual page 32

Chapter 1 Installing the ValueLoader
Preparing the Host and Verifying the Connection
18
4 Click the
Action
Management dialog box.
5 Click
Scan for Hardware Changes
Server 2003 scan for the ValueLoader. The ValueLoader appears
under
Medium Changers
6 Right-click the
Unknown Medium Changer Device
click .
Properties
7 Select the
Drivers
8 Click the
Reinstall Driver
9 When the Upgrade Device Driver Wizard appears, click the
button.
10 Click
Display a list...
11 Click the
Have Disk
the device drivers on your system, then click the
12 Click the
LTO ValueLoader Medium Changer
Medium Changer
button.
Next
Note: Depending on the status of your system and the exact path
taken to select the device drivers, the drivers may appear
as
ltomc.inf
13 Click the button again to install the driver.
Next
14 Click the
Finish
15 Close the
Device Properties
The ValueLoader appears in the
as
LTO ValueLoader Medium Changer
depending on your drive type. It is now ready to use.
Changer
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
button in the upper-left corner of the Computer
. Windows 2000 and Windows
again.
tab.
or
Update Driver
and then click the
button. Type the path to where you have saved
entry, depending on your drive type, and click the
or .
ltovsmc.sys
button.
dialog box.
Device Manager
or
LTO-2 ValueLoader Medium
listing and then
button.
button.
Next
button.
OK
or
LTO-2 ValueLoader
under
Medium Changers
Next