Updating Firmware; Using Scsi - Quantum ValueLoader User Manual

ValueLoader Administration

Updating Firmware

Updating Firmware

Using SCSI

3
40
3 Press the
[Enter]
about to turn Autoload Mode on or off.
4 Press the
[Enter]
press to exit and not save the changes.
[Cancel]
Regardless of the firmware update technique,
Caution:
power cycle or reset the ValueLoader during the upgrade
process
inoperable.
Note: After a firmware update, the firmware revision displayed
on the LCD may not be updated until the ValueLoader is
power cycled.
Quantum has the files and instructions necessary to update both the drive
and ValueLoader firmware via SCSI. Refer to
details.
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
button. The LCD screen indicates whether you are
button to accept the change to Autoload Mode or
. Doing so could cause the ValueLoader to become
do not
for
www.Quantum.com
3