Quantum ValueLoader User Manual page 30

Chapter 1 Installing the ValueLoader
Preparing the Host and Verifying the Connection
16
Note: The following instructions assume that you have downloaded
the appropriate device drivers from
have saved them in a known location on your computer
system.
Tape Drive Device Driver
(Windows 2000 and Windows Server 2003)
To install the tape drive device driver:
1 Make sure that you are logged on to the host server with
Administrator privileges.
2 Open the device manager (please refer to your OS documentation for
specific instructions). For example, right-click the
on the Windows desktop, then click
.
Manager
• For LTO-1 drives, the tape drive should be listed under the
Other Devices
• For LTO-2 drives, the tape drive should be listed under the
Other Devices
3 For LTO-1 drives, right-click the
click , and then click the
Uninstall
to remove the device.
For LTO-2 drives, right-click the
click , and then click the
Uninstall
to remove the device.
4 Click the
Action
dialog box.
Management
5 Click
Scan for Hardware Changes
2003 scan for the drive. The drive appears under
again.
6 For LTO-1 drives, right-click the
listing and then click
For LTO-2 drives, right-click the
listing and then click
7 Select the
Drivers
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Manage
item as
HP Ultrium-1 SCSI Sequential Device
item as
HP Ultrium-2 SCSI Sequential Device
HP Ultrium-1 SCSI Sequential Device
button to confirm that you want
OK
HP Ultrium-2 SCSI Sequential Device
button to confirm that you want
OK
button in the upper-left corner of the
. Windows 2000 or Windows Server
HP Ultrium-1 SCSI Sequential Device
.
Properties
HP Ultrium-2 SCSI Sequential Device
.
Properties
tab.
and
www.Quantum.com
My Computer
, and then click
Device
.
.
Computer
? Other Devices
1
icon
?
?
,
,