Chapter 1 Installing the ValueLoader
Installing the ValueLoader into a Rack
Figure 5 Installing
Mounting Brackets
(Left Side Shown)
10
3 Using screws and clip nuts from the rackmount hardware package,
secure one rail to each side of the rack in the location where you plan
to install the ValueLoader.
•
Be sure to secure both the front and back of each rail to the rack.
The rails extend to fit a variety of rack depths.
•
The correct orientation of the left rail is shown in
for the right rail.
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
figure
6. Repeat