Quantum ValueLoader User Manual page 31

8 Click the
Reinstall Driver
9 When the Upgrade Device Driver Wizard appears, click the
button.
10 Click
Tape Drives
11 Click the
Have Disk
the device drivers on your system, then click the
12 For LTO-1 drives, click the
click the button
Next
For LTO-2 drives, click the
click the button..
Next
Note: Depending on the status of your system and the exact path
taken to select the device drivers, the drivers may appear
as
hplto.inf
13 Click the button again to install the driver.
Next
14 Click the
Finish
15 Close the
Device Properties
The drive appears in the
ValueLoader Tape Drive
your drive type. It is now ready to use.
ValueLoader Device Driver
(Windows 2000 and Windows Server 2003)
To install the ValueLoader device driver:
1 Make sure that you are logged onto the host server with
Administrator privileges.
2 Right-click the
My Computer
, and then click
Manage
The tape drive should be listed under the
Unknown Medium Changer Device
3 Right-click the
Unknown Medium Changer Device
, and then click the
Uninstall
remove the device.
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Chapter 1 Installing the ValueLoader
Preparing the Host and Verifying the Connection
or
Update Driver
and then click the
Next
button. Type the path to where you have saved
LTO ValueLoader Tape Drive
LTO-2 ValueLoader Tape Drive
or .
hplto.sys
button.
dialog box.
under
Device Manager
or
LTO-2 ValueLoader Tape Drive
icon on the Windows desktop, then click
Device Manager
.
button to confirm that you want to
OK
button.
button.
button.
OK
entry and
entry and
as either
Tape Drives
, depending on
.
item as
Medium Changers
listing, click
Next
LTO
1
17