Figure 12 Importing A Cartridge - Quantum ValueLoader User Manual

Figure 12 Importing a
Cartridge
2 From the Home screen or main menu, press the
appears on the top line of the LCD screen.
Commands
3 Press the
[Enter]
4 Press the or
[+] [-]
Press to select.
[Enter]
5 Press the or
[+] [-]
LCD screen and press the
to import a cartridge to an occupied slot.
6 When
Insert Cartridge Slot
Export slot opens, insert the desired data cartridge into the Import/
Export slot so that the write-protect switch is facing out from the
ValueLoader and towards the left.
If you are using the Operator's Panel to clean the drive,
Note:
import the cleaning cartridge only when the front panel
indicates that cleaning is needed. You may keep a cleaning
cartridge in the ValueLoader if the backup software can
manage the drive cleaning.
7 Repeat steps 5 and
8 Press the
[Cancel]
cartridges.
9 Verify that the LCD screen shows that the desired slots have
cartridges installed.
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Chapter 2 Operating the ValueLoader
button to access the available options.
button until appears on the LCD screen.
Import
button until the desired slot number appears on the
button. You are not given the option
[Enter]
appears on the LCD screen and the Import/
6 as needed for additional cartridges.
button when you have finished importing
Using Cartridges
or button until
[+] [-]
27