View Event Log; Product Revision - Quantum ValueLoader User Manual

ValueLoader Administration
Retrieving Information About the ValueLoader

View Event Log

3

Product Revision

42
2 Press the or
[+]
The LCD screen displays the total cycle count.
3 Press the
[Cancel]
This option provides access to the most recent ValueLoader errors and
events (see table 5
To use this option:
1 From the Home Screen or main menu, press the
appears on the top line of the LCD screen, and then press
Information
the button to access the available options.
[Enter]
2 Press the or
[+]
screen. The LCD screen also displays the quantity of errors and
events currently stored in the event log.
3 Press the
[Enter]
4 Press the or
[+]
5 Press
[Cancel]
3 This option displays the product revision of the ValueLoader.
To use this option:
1 From the Home Screen or main menu, press the
appears on the top line of the LCD screen, and then press
Information
the button to access the available options.
[Enter]
2 Press the or
[+]
The LCD screen displays the revision of the firmware currently
installed in the ValueLoader.
3 Press the
[Cancel]
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
button until
[-] Cycle Count
button when finished.
on page 58).
button until
[-] View Event Log
button to access the most recently logged event.
button to display each event in the log.
[-]
when done.
button until
[-] Product Rev
button when finished.
appears on the LCD screen.
or button until
[+] [-]
appears on the LCD
or button until
[+] [-]
appears on the LCD screen.