Led Indicators; Table 2 Leds - Quantum ValueLoader User Manual

LED Indicators

2

Table 2 LEDs

LED
Ready/Activity
Clean Drive
Media Attention
Error
The Operator's Panel includes four LED indicators that provide a variety
of information as detailed in
Color
Green
Amber
Amber
Red
ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
Chapter 2 Operating the ValueLoader
table 2.
Description
Illuminated when power is on. Blinking whenever
there is tape drive or ValueLoader robotics
activity.
Illuminated when the tape drive needs to be
cleaned. The LED turns off when cleaning is
successfully completed (see
Drive on page 31). Regular periodic cleaning of the
LTO-1 or LTO-2 tape drives is not required.
Illuminated if a media-related error has occurred.
This condition can be the result of dirty read/write
heads in the tape drive, or if an invalid or damaged
cartridge is inserted. The offending cartridge will
show an "!" in the cartridge inventory display for
the corresponding slot. Exporting the indicated
cartridge will clear the error condition (see
Exporting Cartridges
symptoms occur on multiple known good
cartridges, consider cleaning the tape drive (see
Cleaning the Tape Drive
cartridge causes these symptoms regularly, that
cartridge may be defective or invalid.
Illuminated when an unrecoverable tape drive or
ValueLoader error occurs. A corresponding error
message appears on the LCD screen (see
ValueLoader Error Codes
Operator's Panel Overview
Cleaning the Tape
on page 28). If these
on page 31). If a particular
on page 57).
23