How To Replace The Y Flexible Cable - GRAPHTEC Craft ROBO CC100-20 Service Manual

4 DISASSEMBLY AMD REASSEMBLY

4.14 How to Replace the Y Flexible Cable

Disassembly
(1) Detach the left side cover (see Section 4.1).
(2) Detach the top cover (see Section 4.2).
(3) Detach the right side cover (see Section 4.3).
(4) Detach the rear guide (see Section 4.5).
(5) Detach the guide rail (see Section 4.11).
(6) Detach the Y flexible cable from the guide rail (see Section 4.11).
(7) Lift up the bottom of the carriage cover, and then detach the carriage cover from the carriage.
Carriage unit
Carriage cover
Lift up here to detach the carriage cover.
(8) Disconnect the Y flexible cable from J201 on the carriage board.
J201
Y flexible cable
(9) Disconnect the Y flexible cable from J8 on the main board, and then detach the Y flexible cable.
CC100-UM-251-9370 4-16