Setting Zone Bypass; Enabling Zone Bypass; Defining Bypass Zones - Rosslare HomeLogiX HLX-40 User Manual

User Menu Options
4. Specify the format in which the date is displayed: DD-MM-YY or MM-DD-
YY.
Press Enter to confirm your selection.
5.
The date and time format is set.
9.8

Setting Zone Bypass

You can define certain zones to be bypassed when arming the system to deal
with different situations, such as when the sensors battery is low and is
sending an event, or when arming the system while someone is still on
premises in certain areas. In general, you need to also determine whether to
activate zone bypass.
This feature is available to both User and Master level users, and is only active if
it is set by the installer.
9.8.1

Enabling Zone Bypass

For the zone bypass option to work, the feature must first be enabled and at
least one zone must be enrolled and/or active.
If Zone Bypass is disabled, pressing Enter shows "BYPASS DISABLED". If Zone
Bypass is enabled but there is no enrolled or active zone, pressing Enter shows
"NO ACTIVE ZONE".
To enable zone bypass:
1. Using the Menu button, select
2. Using the Menu and Enter buttons, access the
Using the Menu button, choose to either Activate or Deactivate the
3.
zone bypass feature.
Press Enter to save.
4.
9.8.2

Defining Bypass Zones

You can define each of the 40 zones to be bypassed when arming the system.
The zone bypass is deactivated once the system is disarmed following the
bypassed arming.
To define bypass zones:
Using the Menu button, select
1.
2. Press Enter to access the
3. Using the numeric keypad or the Menu button, select the specific zone to
define and press Enter to confirm your selection.
4. Using the Menu button, choose to either Bypass or Un-Bypass the
selected zone.
Press Enter to save your selection.
5.
HomeLogiX™ HLX-40 User Guide
Zone Bypass
and press Enter.
Zone Bypass and press Enter.
Select Zone
submenu.
Set Activation
submenu.
33