Assembly And Commissioning; Training Assembly/Commissioning Staff; Assembly And Installation - WAGNER GM 1-350 Operating Manual

VERSION 02/2015
OPERATING MANUAL
6

ASSEMBLY AND COMMISSIONING

6.1

TRAINING ASSEMBLY/COMMISSIONING STAFF

The assembly and commissioning staff must have the technical skills to safely undertake
commissioning.
When assembling, commissioning and carrying out all work, read and follow the
operating manuals and safety regulations for the additionally required system
components.
A skilled person must check to ensure that the device is in a reliable state after it is installed
and commissioned.
6.2

ASSEMBLY AND INSTALLATION

6.2.1
TYPICAL AIRLESS SPRAYING SYSTEM
A Material pump
B Pressure air shut-off valve
C Pressure regulator
D Grounding cable
E High-pressure paint hose,
electrically conductive
The Airless manual gun GM 1-350/530 must be combined with various components to
make up a spraying system. The system shown in the fi gure is only one example of an
Airless spraying system. Your Wagner distributor would be happy to assist you in creating
a spraying system solution that meets your individual needs.
You must familiarize yourself with the operating manuals and the safety regulations for all
additional system components required before starting with commissioning.
ORDER NUMBER DOC2349369
C
I
G
J
D
K
B
A
H
B_05044
F Airless manual gun
G High-pressure fi lter/fl uid pressure release
H Return line
I Pump mounting trolley
J Suction system
K Compressed air main
GM 1-350/530
F
E
13