Ce Declaration Of Conformity; Notes On National Regulations And Guidelines - WAGNER GM 1-350 Operating Manual

VERSION 02/2015
OPERATING MANUAL
14.3

CE DECLARATION OF CONFORMITY

Herewith we declare that the supplied version of
GM 1-350
GM 1-530
comply with the following guidelines:
2006/42/EC
94/9/EC
Applied standards, in particular:
DIN EN ISO 12100: 2010
DIN EN 1127-1: 2011
DIN EN 1953: 2013
DIN EN ISO 9001: 2009
DIN EN ISO/IEC 80079-34: 2012
Applied national technical standards and specifi cations, in particular:
Part 2, Chapter 2.36
Part 2, Chapter 2.29
Note: All titles can be ordered from Heymanns Publishing House in Cologne, or they
can be found on the Internet.
EC Certifi cate of Conformity
The CE certifi cate of conformity is enclosed with this product. If needed, further copies
can be ordered through your WAGNER dealer by specifying the product name and serial
number.
Order number:
14.4

NOTES ON NATIONAL REGULATIONS AND GUIDELINES

Part 2, Chapter 2.36 "Working with Liquid Ejection Devices"
Part 2, Chapter 2.29 "Working with Coating Products"
Guidelines for equipment cleaning work pieces
with solvents
Avoiding ignition risks
Painting rooms and equipment
Guidelines for liquid ejection devices
Note: All titles can be ordered from Heymanns Publishing House in Cologne, or they
can be found on the Internet.
ORDER NUMBER DOC2349369
DIN EN ISO 14462: 2005 + A1: 2009
DIN EN 13463-1: 2009
DIN EN 13463-5: 2011
DIN EN ISO 13732-1: 2008
DIN EN ISO 4413: 2010
2355332
GM 1-350/530
31