Description; Design; Device Type; Type Of Use - WAGNER GM 1-350 Operating Manual

VERSION 02/2015
OPERATING MANUAL
5

DESCRIPTION

5.1

DESIGN

A
B
C
Designation
A Preload nut
B Trigger locking device
C Product connection with swivel joint
D Trigger
5.2

DEVICE TYPE

Airless manual gun for manually coating work pieces.
5.3

TYPE OF USE

The spray gun is intended for atomizing liquid coating products under pressure (airless process).
5.4

MODE OF OPERATION

A high-pressure pump sucks in the coating product and conveys it under pressure to the nozzle in the spray
gun. The coating product atomizes as it is pressed through the nozzle at high pressure. The product valve
opens if the trigger (D) is operated with the locking device (B) released. The spray profi le changes depending
on the nozzle selection.
5.5

PROTECTIVE AND MONITORING EQUIPMENT

Secure the spray gun with the locking device (B).
The nozzle holder (E) has an anti-contact guard.
5.6

SCOPE OF DELIVERY

This Airless manual gun is available in two diff erent variants (350 bar, 530 bar). The choice of nozzle depends
on the application, therefore these components are not included in the scope of delivery. A selection guide for
gun accessories can be found in Chapter 12.
Order No. Designation Field of application
1 2349286 GM 1-350
1 2349287 GM 1-530
ORDER NUMBER DOC2349369
G
B_5042
35 MPa; 350 bar; 5076 psi, NPSM1/4" product connection, fi nishing
53 MPa; 530 bar; 7687 psi, NPSM1/4" product connection, protective coating
A
F
B
E
D
C
Designation
E Nozzle holder
F Reversible nozzle (not included in scope of delivery)
G Gun housing
GM 1-350/530
G
F
E
D
B
E
B_5302
11