WAGNER GM 1-350 Operating Manual page 18

VERSION 02/2015
OPERATING MANUAL
7.3.3
CHANGING THE AIRLESS NOZZLE
Defective Airless nozzle!
Insuffi cient paint application quality
Do not use sharp-edged objects on the carbide on the Airless nozzle.
Nozzles can be easily removed and replaced without
having to take apart the Airless spray gun.
1. Relieve the pressure on the spray gun and product
pressure generator in accordance with Chapter 7.3.2.
2. Secure the spray gun with the locking device.
3. Remove the nozzle from the opening at the nozzle
holder. Attention: when removing the reversing nozzle,
always aim the spray gun at the fl oor, as product can still
come out due to product being trapped between the
reversing nozzle and the valve seat.
4. Insert the new nozzle into the opening at the nozzle
holder. The tip on the reversing nozzle has to point
forward in the direction of spray.
7.3.4
CLEANING THE AIRLESS NOZZLE
For disassembly and assembly of Airless nozzles, see Chapter 7.3.3.
The Airless nozzle can be placed into a cleaning solution recommended by the paint
manufacturer.
ORDER NUMBER DOC2349369
NOTICE
GM 1-350/530
B_5049
18