Identification; Ce Explosion Protection Identification; Identification "X; Type Plate - WAGNER GM 1-350 Operating Manual

VERSION 02/2015
OPERATING MANUAL
3

IDENTIFICATION

3.1

CE EXPLOSION PROTECTION IDENTIFICATION

The device is compliant with Ex II 2G X regulations and is suitable for use in potentially
explosive areas (zone 1) in accordance with Directive 94/9/EC (ATEX).
Device type: Airless manual gun
Manufacturer: J. Wagner AG, CH - 9450 Altstätten
II 2G X
CE European Communities
Ex Symbol for explosion protection
II Device class II
3.2

IDENTIFICATION "X"

X: The maximum surface temperature corresponds to the permissible product temperature.
This and the permissible ambient temperature can be found in the "Technical Data" chapter.
Safe handling of WAGNER spray devices
Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:
Do not knock or push the device against steel or rusty iron.
Do not drop the spray gun.
Use only tools that are made of a permitted material.
Ignition temperature of the coating material
Ensure that the ignition temperature of the coating product is above the maximum
surface temperature.
Cleaning
If there are deposits on the surfaces, the device may form electrostatic charges. Flames or
sparks can form during discharge.
Remove deposits from the surfaces to maintain conductivity.
3.3

TYPE PLATE

3.3.1
GM 1-530 EXAMPLE TYPE PLATE
1 Serial number
2 Spray gun designation
3 Maximum product pressure
4 Maximum product temperature
5 Warning
6 Danger of injury from injection/read operating manual
7 Fire and explosion hazard/read operating manual
8 "Warning – Hot surface!"
ORDER NUMBER DOC2349369
2 Category 2 (Zone 1)
G Ex-atmosphere gas
X Special Notice
II 2G X
5 WARNING
SKIN INJECTION HAZARD
6
READ INSTRUCTION MANUAL
FIRE AND EXPLOSION HAZARD
7
READ INSTRUCTION MANUAL
GM 1-350/530
1 2
Serial-No. XXXXX
J. Wagner AG
3 MAX WPR
9450 Altstaetten
530 bar
SWISS MADE
7687 psi
B_5041
GM 1-530
MAX TEMP 4
85 °C
185 °F
8
6