WAGNER GM 1-350 Operating Manual page 23

VERSION 02/2015
OPERATING MANUAL
8.2.3
SAFETY CHECKS
Daily: Check the grounding (see Chapter 6.3) and hoses (see Chapter 8.2.3.1).
8.2.3.1
PRODUCT HOSES, TUBES AND COUPLINGS
Bursting hose, bursting threaded joints!
Danger to life from injection of product and from fl ying parts.
The service life of the complete hoses between product pressure generator and application
device is reduced due to environmental infl uences even when handled correctly.
Check hoses, pipes, and couplings every day and replace if necessary.
Before every commissioning, check all connections for leaks.
Additionally, the operator must regularly check the complete hoses for wear and tear
as well as for damage at intervals that he/she has set. Records of these checks must
be kept.
The complete hose is to be replaced as soon as one of the two following intervals has
been exceeded:
- 6 years from the date of the hose crimping (see fi tting embossing).
- 10 years from the date of the hose imprinting.
Fitting
Meaning
embossing
xxx bar Pressure
Crimping date
yymm
(year/month)
XX Internal code
ORDER NUMBER DOC2349369
DANGER
Ensure that the hose material is chemically resistant to the
sprayed products and the used fl ushing agents.
Ensure that the spray gun, threaded joints, and product hose
between the device and the spray gun are suitable for the
generated pressure.
Ensure that the following information can be seen on the hose:
- Manufacturer
- Permissible operating pressure
- Date of manufacture.
Hose imprinting
Wagner
yymm
xxx bar (xx MPa)
e.g. 270 bar (27MPa)
XX
DNxx (e.g. DN10)
GM 1-350/530
Meaning
Name /
Manufacturer
Date of
manufacture (year/
month)
Pressure
Internal code
Nominal diameter
23