Accessories; Nozzles; Intermediate Piece; Spare Parts - WAGNER GM 1-350 Operating Manual

VERSION 02/2015
OPERATING MANUAL
12

ACCESSORIES

12.1

NOZZLES

Article No. 1006xxx
Size
10° 20° 30°
07 ***
09 209 309
***
11 111 211 311
13 113 213 313
15 115 215 315
17 217 317
19 219 319
21 221
23 223
25 223
27 223
29
31 223
33
35 223
43 223
52
B_05058
51 104 152
(2,0) (4,0) (6,0)
12.2

INTERMEDIATE PIECE

Order No.
2353547
13

SPARE PARTS

13.1

HOW CAN SPARE PARTS BE ORDERED?

Always supply the following information to ensure delivery of the right spare part:
Order number, designation and quantity
The unit quantity does not have to be identical with the numbers in the "
This number merely indicates how many of the respective parts are used in each component.
The following information is also required to ensure smooth processing of your order:
- Address for the invoice
- Name of the person to be contacted in the
event of any queries
ORDER NUMBER DOC2349369
Wagner Profi Tip HP nozzle chart
In order to determine the article number of a nozzle, please
select the number from the table and replace the three xxx.
Example: This means nozzle 411 has article number: 1006411
Spray angle
40° 50° 60°
407
409 509 609
411 511 611
413 513 613
415 515 615
417 517 617
419 519 619
421 521 621
423 523 623
425 525 625
427 527 627
629
431 531 631
433
435 535 635
543
552
203 254 305
(8,0) (10,0) (12,0)
Spray pattern width (inch)**
Designation
Intermediate piece "F" 11/16-16-UN
Material fi lter
70° 80°
(in mesh)
813
715 815
717
719 819
821
723 823
825
827
356 406
* Specifi cation in l/min, tested with water and 100 bar pressure
(14,0) (16,0)
** Spray width at approx. 30 cm distance from the sprayed object
and 110 bar (11 MPa) of pressure with lacquer 56 DIN/4 seconds
*** Possible deviations in the spray jet width
- Address for delivery
- Type of delivery (normal mail, express delivery, air
freight, courier, etc.)
GM 1-350/530
Drilled hole Material fl ow*
inch (mm) l/min (gal/min)
0,007 (0,18) 0,23 (0,061)
0,009 (0,23) 0,26 (0,069)
0,011 (0,28) 0,38 (0,100)
0,013 (0,33) 0,55 (0,145)
0,015 (0,38) 0,75 (0,198)
0,017 (0,43) 0,96 (0,254)
0,019 (0,48) 1,20 (0,317)
0,021 (0,53) 1,45 (0,383)
0,023 (0,58) 1,62 (0,428)
0,025 (0,64) 1,92 (0,507)
0,027 (0,69) 2,25 (0,594)
0,029 (0,75) 2,57 (0,679)
0,031 (0,79) 2,95 (0,779)
0,033 (0,83) 3,35 (0,885)
0,035 (0,90) 3,80 (1,004)
0,043 (1,10) 5,89 (1,556)
0,052 (1,30) 6,14 (1,622)
" columns of the lists.
B_05300
27