Internal Sas Cable Option - HP ProLiant DL360 Gen9 User Manual

Internal SAS cable option

WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause ESD.
Back up all server data.
1.
Power down the server (on page 20).
2.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 21).
o
For instructions on how to extend or remove the server from the rack, see the documentation that ships
with the rack rail system.
Remove the access panel (on page 21).
4.
Remove the primary PCI riser cage
5.
Remove the slot two expansion board blank.
6.
The controller board can be installed in slot 1 or slot 2.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
("Remove the PCI riser cage" on page 22).
Hardware options installation 63