HP ProLiant DL360 Gen9 User Manual page 75

For instructions on how to extend or remove the server from the rack, see the documentation that ships
with the rack rail system.
Remove the access panel (on page 21).
4.
Remove the primary PCI riser cage
5.
Remove the expansion slot blank
6.
Install the expansion board:
7.
Primary riser cage
o
Secondary riser cage
o
Connect any required internal or external cables to the expansion board. See the documentation that
8.
ships with the expansion board.
Install the PCI riser cage (on page 23).
9.
Install the access panel (on page 21).
10.
Install the server into the rack.
11.
("Remove the PCI riser
("Removing the expansion slot
cage" on page 22).
blanks" on page 72).
Hardware options installation 75