Power Supply Specifications; Hp 500W Flex Slot Platinum Hot-Plug Power Supply - HP ProLiant DL360 Gen9 User Manual

Specification
heatsinks, one Smart Array
controller, five fans)
SFF maximum (10 drives, two
processors, two power supplies, two
heatsinks, one Smart Array
controller, seven fans)
LFF minimum (one drive, one
processor, one power supply, two
heatsinks, one Smart Array
controller, five fans)
LFF maximum (Four drives, two
processors, two power supplies, two
heatsinks, one Smart Array
controller, seven fans)

Power supply specifications

Depending on installed options, the server is configured with one of the following power supplies:
•
HP 500W Flex Slot Platinum Hot-plug Power Supply (on page 111)
•
HP 800W Flex Slot Platinum Hot-plug Power Supply (on page 112)
•
HP 1400W Flex Slot Platinum Plus Hot-plug Power Supply (on page 112)
For detailed power supply specifications, see the QuickSpecs on the HP website
(http://www.hp.com/go/proliant/powersupply).

HP 500W Flex Slot Platinum Hot-plug Power Supply

Specification
Input requirements
Rated input voltage
Rated input frequency
Rated input current
Maximum rated input power
BTUs per hour
Power supply output
Rated steady-state power
Maximum peak power
Value
15.31 kg (33.36 lb)
13.77 kg (30.36 lb)
16.78 kg (37 lb)
Value
100 to 120 VAC
200 to 240 VAC
240 VDC for China only
50 Hz to 60 Hz
5.8 A at 100 VAC
2.8 A at 200 VAC
2.4 A at 240 VDC
580 W at 100 VAC
560 W at 200 VAC
1979 at 100 VAC
1911 at 200 VAC
500 W at 100 VAC to 120 VAC
input
500 W at 200 VAC to 240 VAC
input
500 W at 100 VAC to 120 VAC
input
Specifications 111