Connect the VGA/USB cable to the Front VGA/USB connector toward the rear of the system board.
4 LFF optical drive connection
o
Connect the SATA optical cable to the SATA optical/storage drive connector.
Install the access panel (on page 21).
8.
Slide the server into the rack.
9.
Connect all power cords to the server, and then power up the server.
10.
Full height PCIe x16 riser cage assembly option
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause ESD.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
Hardware options installation 54