Powering On And Selecting Boot Options In Uefi Boot Mode; Installing The Operating System - HP ProLiant DL360 Gen9 User Manual

Hide thumbs Also See for ProLiant DL360 Gen9:
Table of Contents

Advertisement

*The slot 3 PCIe 3 riser is optional and requires a second processor before installation.
Connect the power cord to the server.
3.
Use the Velcro strip to secure the power cord.
4.
Connect the power cord to the power source.
5.
Powering on and selecting boot options in UEFI Boot
Mode
On servers operating in UEFI Boot Mode, the boot controller and boot order are set automatically.
Press the Power On/Standby button.
1.
During the initial boot:
2.
To modify the server configuration ROM default settings, press the F9 key in the HP ProLiant POST
o
screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the
English language.
If you do not need to modify the server configuration and are ready to install the system software,
o
press the F10 key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the HP website
(http://www.hp.com/go/ProLiantUEFI/docs).

Installing the operating system

This HP ProLiant server does not ship with provisioning media. Everything needed to manage and install the
system software and firmware is preloaded on the server.
To operate properly, the server must have a supported operating system. For the latest information on
operating system support, see the HP website (http://www.hp.com/go/supportos).
To install an operating system on the server, use one of the following methods:
Intelligent Provisioning—iLO contains Intelligent Provisioning for embedded deployment, updating, and
provisioning capabilities. Intelligent Provisioning can configure the server and install an operating
system.
To install an operating system on the server with Intelligent Provisioning (local or remote):
Connect the Ethernet cable between the network connector on the server and a network jack.
a.
Press the Power On/Standby button.
b.
During server POST, press the F10 key.
c.
Complete the initial Preferences and Registration portion of Intelligent Provisioning (on page 94).
d.
Setup 30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents