Registering The Server - HP ProLiant DL360 Gen9 User Manual

At the 1 Start screen, click the Configure and Install button.
e.
To finish the installation, follow the onscreen prompts. An Internet connection is required to update
f.
the firmware and systems software.
•
Remote deployment installation—To deploy an operating system remotely, use Insight Control server
deployment for an automated solution.
For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP
website (http://www.hp.com/go/spp/download). Software and firmware must be updated before using
the server for the first time, unless any installed software or components require an older version. For more
information, see "Keeping the system current (on page 101)."
For more information on using these installation methods, see the HP website (http://www.hp.com/go/ilo).

Registering the server

To experience quicker service and more efficient support, register the product at the HP Product Registration
website (http://register.hp.com).
Setup 31