HP ProLiant DL360 Gen9 User Manual page 29

WARNING: This server is very heavy. To reduce the risk of personal injury or damage to the
equipment:
• Observe local occupational health and safety requirements and guidelines for manual
material handling.
Get help to lift and stabilize the product during installation or removal, especially when the
•
product is not fastened to the rails. HP recommends that a minimum of two people are required
for all rack server installations. A third person may be required to help align the server if the
server is installed higher than chest level.
Use caution when installing the server in or removing the server from the rack; it is unstable
•
when not fastened to the rails.
CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of the rack.
Install the heaviest item first, and continue to populate the rack from the bottom to the top.
Install the server and cable management arm into the rack. See the installation instructions that ship with
1.
the selected rail system.
Connect the peripheral devices to the server.
2.
Item Description
Slot 1 PCIe3 x16 (16, 8, 4, 1)
1
Slot 2 PCIe 3 x8 ( 8, 4, 1)
2
Slot 3 PCIe 3 x16 ( 16, 8, 4, 1)*
3
Power supply 2
4
Power supply 1
5
Video connector
6
NIC connector 4
7
NIC connector 3
8
NIC connector 2
9
NIC connector 1
10
iLO 4 connector
11
Serial connector (optional)
12
USB 3.0 connectors
13
FlexibleLOM bay
14
Setup 29