HP ProLiant DL360 Gen9 User Manual page 55

Back up all server data.
1.
Power down the server (on page 20).
2.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 21).
o
For instructions on how to extend or remove the server from the rack, see the documentation that ships
with the rack rail system.
Remove the access panel (on page 21).
4.
Remove the primary PCI riser cage
5.
If installed, remove the low profile riser board from the secondary riser board slot. Remove the riser
6.
cage bracket from the primary PCIe riser cage.
Lift and remove the riser cage latch.
7.
("Remove the PCI riser cage" on page 22).
Hardware options installation 55