Lff Universal Media Bay Option - HP ProLiant DL360 Gen9 User Manual

Connect the VGA/USB cable to the Front VGA/USB connector toward the rear of the system board.
Install the access panel (on page 21).
8.
Slide the server into the rack.
9.
Connect all power cords to the server, and then power up the server.
10.

4 LFF Universal Media Bay option

WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause ESD.
Back up all server data.
1.
Power down the server (on page 20).
2.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 21).
o
For instructions on how to extend or remove the server from the rack, see the documentation that ships
with the rack rail system.
Remove the access panel (on page 21).
4.
Remove the bay blanks.
5.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
Hardware options installation 51