Install the full height PCIe x16 riser cage latch.
8.
Align the PCIe x16 riser cage with the corresponding connector on the system board, and then press
9.
down on the riser cage.
If a GPU is installed in the full height PCIe riser cage option, connect the GPU cable to the riser cage
connector and the installed GPU.
CAUTION:
all PCI slots have either an expansion slot cover or an expansion board installed.
Low profile PCIe slot riser cage option
WARNING:
internal system components to cool before touching them.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Hardware options installation 56