Table of Contents
Advertisement
Install the TPM board. Press down on the connector to seat the board
6.
page 15).
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
Install the PCI riser cage (on page 23).
8.
Install the access panel (on page 21).
9.
Install the server into the rack.
10.
Power up the server (on page 20).
11.
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
("System board
components" on
Hardware options installation 83
Hide quick links:
Advertisement
Table of Contents
