HP ProLiant DL360 Gen9 User Manual page 61

CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
Back up all server data.
1.
Power down the server (on page 20).
2.
Do one of the following:
3.
Extend the server from the rack (on page 20).
o
Remove the server from the rack (on page 21).
o
For instructions on how to extend or remove the server from the rack, see the documentation that ships
with the rack rail system.
Remove the access panel (on page 21).
4.
Remove the primary PCI riser cage
5.
Install the P840 controller board.
6.
Install the riser board assembly.
7.
("Remove the PCI riser cage" on page 22).
Hardware options installation 61